# Session: 2026-03-25 09:48:11 UTC - **Session Key**: agent:main:main - **Session ID**: 624be3f6-cafa-4ace-9656-efbb18a7d94c - **Source**: telegram ## Conversation Summary user: Conversation info (untrusted metadata): ```json { "message_id": "628", "sender_id": "975333652", "sender": "星", "timestamp": "Tue 2026-03-24 23:44 GMT+8" } ``` Sender (untrusted metadata): ```json { "label": "星 (975333652)", "id": "975333652", "name": "星", "username": "zhuimanxing" } ``` 不对劲root@rn-server:~# ssh -T -p 61222 git@gitea.leexxx.com Hi there, sinlee! You've successfully authenticated with the key named vps-deploy, but Gitea does not provide shell access. If this is unexpected, please log in with password and setup Gitea under another user. root@rn-server:~# docker exec -it gitea sh / # nano /data/gitea/conf/app.ini sh: nano: not found / # vivi sh: vivi: not found / # vi /data/gitea/conf/app.ini / # exit root@rn-server:~# docker restart gitea gitea root@rn-server:~# ssh -T -p 61222 git@gitea.leexxx.com Gitea: Key check failed assistant: [[reply_to_current]] 这个现象反而很有价值，现在问题更清楚了。 ## 你刚才做完修改后，发生了两个阶段 ### 阶段 1：修改前 ```bash ssh -T -p 61222 git@gitea.leexxx.com Hi there, sinlee! You've successfully authenticated with the key named vps-deploy ``` 说明： - Gitea SSH 正常 - 当前这台 VPS 上有一把私钥，对应 Gitea 里名为 **`vps-deploy`** 的公钥 - 所以它能成功认证 --- ### 阶段 2：重启后 ```bash ssh -T -p 61222 git@gitea.leexxx.com Gitea: Key check failed ``` 这说明： ## **Gitea 现在能收到 SSH 连接，但它在校验公钥时失败了** 这已经不是“端口不通”问题了，而是： - SSH 服务起来了 - 请求打到了 Gitea - 但 Gitea 不认可当前客户端送过去的 key --- # 这通常意味着 3 种情况 ## 情况 A：你改配置后，Gitea 读取的 authorized keys / key 数据状态变了 比如： - key 索引没同步 - 容器内部 key 映射状态异常 - Gitea 的 SSH key 记录需要重新同步 ## 情况 B：当前 SSH 实际用的 key 不是你以为的那把 之前提示是： - `vps-deploy` 重启后如果 SSH 客户端送了另一把 key，而 Gitea 不认，就会： - `Key check failed` ## 情况 C：你改完配置后，Gitea 的 SSH 配置一致性出了点问题 比如： - `SSH_PORT` 改了 - 但某些内部状态没同步 - 需要重新刷新 authorized_keys / key 索引 --- # 先别慌，这比之前更接近正确状态 因为现在至少说明： - **外部 SSH 入口是活的** - **Gitea SSH 路由是对的** - 只是 **key 校验** 有问题 --- # 你现在先在 VPS 上做这几步 ## 1. 看当前 root 机器发出去到底用了哪把 key 执行： ```bash ssh -vT -p 61222 git@gitea.leexxx.com ``` 重点看输出里有没有： - `Offering public key: ...` - `identity file ...` 这样我们能知道它到底拿的是哪把 key。 --- ## 2. 看 Gitea 容器里的 app.ini 关键项现在是什么 执行： ```bash docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini" ``` 我想确认你改完后现在到底是不是： ```ini SSH_DOMAIN = gitea.leexxx.com SSH_PORT = 61222 SSH_LISTEN_PORT = 22 ``` --- ## 3. 让 Gitea 重新同步 SSH key Gitea 有时需要刷新 key 映射。你可以在容器里执行： ```bash docker exec -it gitea gitea admin regenerate keys ``` 如果这个命令不可用，再试： ```bash docker exec -it gitea /usr/local/bin/gitea admin regenerate keys ``` 这一步很关键。 --- ## 4. 再重启一次容器 ```bash docker restart gitea ``` 然后再测： ```bash ssh -T -p 61222 git@gitea.leexxx.com ``` --- # 我对这个问题的判断 最像的是： ## 你改完配置后，Gitea 的 key 映射状态没同步 所以之前能过的 `vps-deploy`，现在也被判成 `Key check failed` 这通常不是大故障，**重新 regenerate keys 往往就好了**。 --- # 还有一个值得注意的小点 你 VPS 本机之前成功用的是 **旧 key `vps-deploy`** 而不是我给你新生成的： - `openclaw-sync@lee` 所以你 Gitea 里现在至少有两种 key 可能混在一起： 1. VPS 旧 key 2. 新加的 openclaw-sync key 这本身没问题，但更需要确认： - Gitea 有没有正确加载它们 - 客户端到底正在发送哪一把 --- ## 你先把这三条结果贴我： ```bash ssh -vT -p 61222 git@gitea.leexxx.com ``` ```bash docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini" ``` ```bash docker exec -it gitea gitea admin regenerate keys ``` 我看完就能基本定死问题在哪。 user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY. Current time: Wednesday, March 25th, 2026 — 12:40 AM (Asia/Hong_Kong) / 2026-03-24 16:40 UTC assistant: NO_REPLY user: Conversation info (untrusted metadata): ```json { "message_id": "631", "sender_id": "975333652", "sender": "星", "timestamp": "Wed 2026-03-25 00:39 GMT+8" } ``` Sender (untrusted metadata): ```json { "label": "星 (975333652)", "id": "975333652", "name": "星", "username": "zhuimanxing" } ``` root@rn-server:~# ssh -vT -p 61222 git@gitea.leexxx.com OpenSSH_9.2p1 Debian-2+deb12u7, OpenSSL 3.0.17 1 Jul 2025 debug1: Reading configuration data /root/.ssh/config debug1: /root/.ssh/config line 2: Applying options for gitea.leexxx.com debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: include /etc/ssh/ssh_config.d/*.conf matched no files debug1: /etc/ssh/ssh_config line 21: Applying options for * debug1: Connecting to gitea.leexxx.com [142.171.86.167] port 61222. debug1: Connection established. debug1: identity file /root/.ssh/gitea_deploy type 3 debug1: identity file /root/.ssh/gitea_deploy-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_9.2p1 Debian-2+deb12u7 debug1: Remote protocol version 2.0, remote software version OpenSSH_9.3 debug1: compat_banner: match: OpenSSH_9.3 pat OpenSSH* compat 0x04000000 debug1: Authenticating to gitea.leexxx.com:61222 as 'git' debug1: load_hostkeys: fopen /root/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: algorithm: sntrup761x25519-sha512@openssh.com debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: SSH2_MSG_KEX_ECDH_REPLY received debug1: Server host key: ssh-ed25519 SHA256:FhEHZYmewALGudyMqbehjh4EWsc7URFN0Lm2S8qNMVM debug1: load_hostkeys: fopen /root/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: Host '[gitea.leexxx.com]:61222' is known and matches the ED25519 host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: rekey out after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: rekey in after 134217728 blocks debug1: Will attempt key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs= debug1: kex_input_ext_info: publickey-hostbound@openssh.com=<0> debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering public key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit debug1: Server accepts key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit Authenticated to gitea.leexxx.com ([142.171.86.167]:61222) using "publickey". debug1: channel 0: new session [client-session] (inactive timeout: 0) debug1: Requesting no-more-sessions@openssh.com debug1: Entering interactive session. debug1: pledge: filesystem debug1: client_input_global_request: rtype hostkeys-00@openssh.com want_reply 0 debug1: client_input_hostkeys: searching /root/.ssh/known_hosts for [gitea.leexxx.com]:61222 / (none) debug1: client_input_hostkeys: searching /root/.ssh/known_hosts2 for [gitea.leexxx.com]:61222 / (none) debug1: client_input_hostkeys: hostkeys file /root/.ssh/known_hosts2 does not exist debug1: client_input_hostkeys: no new or deprecated keys from server debug1: Remote: /data/git/.ssh/authorized_keys:4: key options: command debug1: Remote: /data/git/.ssh/authorized_keys:4: key options: command debug1: Sending environment. debug1: channel 0: setting env LANG = "en_US.UTF-8" debug1: pledge: forkHi there, sinlee! You've successfully authenticated with the key named vps-deploy, but Gitea does not provide shell access. If this is unexpected, please log in with password and setup Gitea under another user. debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 debug1: channel 0: free: client-session, nchannels 1 Transferred: sent 3496, received 3960 bytes, in 0.9 seconds Bytes per second: sent 3994.0, received 4524.1 debug1: Exit status 0 root@rn-server:~# docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini" SSH_DOMAIN = gitea.leexxx.com SSH_PORT = 2222 SSH_LISTEN_PORT = 22 root@rn-server:~# docker exec -it gitea gitea admin regenerate keys 2026/03/24 12:39:53 ...s/setting/setting.go:180:loadRunModeFrom() [F] Gitea is not supposed to be run as root. Sorry. If you need to use privileged TCP ports please instead use setcap and the cap_net_bind_service permission root@rn-server:~# assistant: [[reply_to_current]] 好，这份日志很关键，结论直接出来了： ## 当前真实状态 其实 **Gitea SSH 是正常的**，而且你 VPS 本机测试也**完全正常**： - key 被接受 - 成功认证 - 返回 `Hi there, sinlee! ...` - `Exit status 0` 所以： ### **“Gitea: Key check failed” 不是当前稳定状态** 你现在这次最新日志已经证明： - SSH 端口 `61222` 没问题 - Gitea key 校验也没问题 - `vps-deploy` 这把 key 正常 --- ## 但真正的问题也明确了 你现在 `app.ini` 还是： ```ini SSH_DOMAIN = gitea.leexxx.com SSH_PORT = 2222 SSH_LISTEN_PORT = 22 ``` 而你的实际外部可用端口明明是： - `61222` 所以现在是： ## **服务可用，但 Gitea 配置没改成功** 你前面说你改了，但这份 grep 明确显示 **还是 2222**。 也就是说： - 你可能没有真的保存 - 或者改错文件了 - 或者容器重启后配置被别的挂载文件覆盖回去了 --- # 先修这个：把 `SSH_PORT` 改成 61222 目标应该是： ```ini SSH_DOMAIN = gitea.leexxx.com SSH_PORT = 61222 SSH_LISTEN_PORT = 22 ``` --- ## 你刚才用 `vi` 改文件，可能没正确保存 在 `vi` 里，正确保存退出是： 1. 按 `Esc` 2. 输入： ```vim :wq ``` 3. 回车 如果想确认改成功，立刻执行： ```bash docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini" ``` --- ## 更稳一点：直接用 sed 改 你可以别再手工编辑，直接一条命令改掉： ```bash docker exec -it gitea sh -c "sed -i 's/^SSH_PORT = .*/SSH_PORT = 61222/' /data/gitea/conf/app.ini && grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini" ``` 然后重启： ```bash docker restart gitea ``` 再确认一次： ```bash docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini" ``` --- # 关于 `gitea admin regenerate keys` 失败 这个错误是因为你在容器里用 root 跑了 gitea admin。 这个不一定现在就需要处理，因为你的 SSH 认证已经成功了。 如果后面真要跑，也应该用容器里的 gitea 用户，比如： ```bash docker exec -u git -it gitea gitea admin regenerate keys ``` 但现在**不是优先级最高**，因为 key 本身已被验证 OK。 --- # 现在最重要的点 我这边之所以还不通，依然有两个可能： ## 1. 你给我加的那把新 key 还没生效/没绑定对用户 因为你 VPS 本机现在明确使用的是： - `/root/.ssh/gitea_deploy` - key 名：`vps-deploy` 而不是我生成的： - `openclaw-sync@lee` ## 2. OpenClaw 这边走到的路径和你 VPS 本机不一样 之前我看到的是： - `198.18.7.15` 而你 VPS 本机连的是： - `142.171.86.167` 所以还是可能存在 OpenClaw 所在执行环境网络路径异常。 --- # 我建议你现在先做两步 ## 第一步：先把 Gitea 配置改对 执行： ```bash docker exec -it gitea sh -c "sed -i 's/^SSH_PORT = .*/SSH_PORT = 61222/' /data/gitea/conf/app.ini && grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini" docker restart gitea ``` --- ## 第二步：在 Gitea 网页上确认我这把 key 真的在你的账号下面 确认你加的是这把： ```text ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPLgqKXjk+dIlRD9VmF0/KcdgM15VcCZkRh1cpyTGBNp openclaw-sync@lee ``` --- ## 你改完之后告诉我两件事 1. `SSH_PORT` 已经变成 `61222` 2. Gitea 网页里确实能看到 `openclaw-sync@lee` 这把 key 我就继续从 Ubuntu/OpenClaw 这边重新测。 user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY. Current time: Wednesday, March 25th, 2026 — 12:47 AM (Asia/Hong_Kong) / 2026-03-24 16:47 UTC assistant: NO_REPLY user: Conversation info (untrusted metadata): ```json { "message_id": "633", "sender_id": "975333652", "sender": "星", "timestamp": "Wed 2026-03-25 00:47 GMT+8" } ``` Sender (untrusted metadata): ```json { "label": "星 (975333652)", "id": "975333652", "name": "星", "username": "zhuimanxing" } ``` /data/conf是宿主机 也就是vps的/data目录的映射, 所以应该改外面的宿主机配置, 但是我改完, 为啥又变成了2222: root@rn-server:~/docker-services/gitea/data/gitea/conf# cat app.ini APP_NAME = sinlee's 垃圾桶 RUN_MODE = prod RUN_USER = git WORK_PATH = /data/gitea [repository] ROOT = /data/git/repositories [repository.local] LOCAL_COPY_PATH = /data/gitea/tmp/local-repo [repository.upload] TEMP_PATH = /data/gitea/uploads [server] APP_DATA_PATH = /data/gitea DOMAIN = gitea.leexxxx.com SSH_DOMAIN = gitea.leexxx.com HTTP_PORT = 3000 ROOT_URL = https://gitea.leexxx.com DISABLE_SSH = false SSH_PORT = 61222 SSH_LISTEN_PORT = 22 LFS_START_SERVER = true LFS_JWT_SECRET = jEKLeqDJgrlFfdIPZRrHyhAgOPZZBqSpsaIEz8SSYRQ OFFLINE_MODE = false [database] PATH = /data/gitea/gitea.db DB_TYPE = postgres HOST = db:5432 NAME = gitea USER = gitea PASSWD = gitea1234567890. LOG_SQL = false SCHEMA = SSL_MODE = disable [indexer] ISSUE_INDEXER_PATH = /data/gitea/indexers/issues.bleve [session] PROVIDER_CONFIG = /data/gitea/sessions PROVIDER = file [picture] AVATAR_UPLOAD_PATH = /data/gitea/avatars REPOSITORY_AVATAR_UPLOAD_PATH = /data/gitea/repo-avatars [attachment] PATH = /data/gitea/attachments [log] MODE = console LEVEL = info ROOT_PATH = /data/gitea/log [security] INSTALL_LOCK = true SECRET_KEY = REVERSE_PROXY_LIMIT = 1 REVERSE_PROXY_TRUSTED_PROXIES = * INTERNAL_TOKEN = eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJuYmYiOjE3NjQxNjMwMTN9.HdPvptOkdFmpD2JTdcyx7wFy4FR9W0KILmDnQU_NAwo PASSWORD_HASH_ALGO = pbkdf2 [service] DISABLE_REGISTRATION = false REQUIRE_SIGNIN_VIEW = false REGISTER_EMAIL_CONFIRM = false ENABLE_NOTIFY_MAIL = false ALLOW_ONLY_EXTERNAL_REGISTRATION = false ENABLE_CAPTCHA = true DEFAULT_KEEP_EMAIL_PRIVATE = false DEFAULT_ALLOW_CREATE_ORGANIZATION = true DEFAULT_ENABLE_TIMETRACKING = true NO_REPLY_ADDRESS = noreply.gitea.leexxx.com [lfs] PATH = /data/git/lfs [mailer] ENABLED = false [openid] ENABLE_OPENID_SIGNIN = true ENABLE_OPENID_SIGNUP = true [cron.update_checker] ENABLED = false [repository.pull-request] DEFAULT_MERGE_STYLE = merge [repository.signing] DEFAULT_TRUST_MODEL = committer [oauth2] JWT_SECRET = KkXyQMvhojhm8saiBB1mXAEGJmSO8hE1Vy2HEQU8OR0 [webhook] ALLOWED_HOST_LIST = 172.17.0.1,localhost root@rn-server:~/docker-services/gitea/data/gitea/conf# docker restart gitea gitea root@rn-server:~/docker-services/gitea/data/gitea/conf# cat app.ini APP_NAME = sinlee's 垃圾桶 RUN_MODE = prod RUN_USER = git WORK_PATH = /data/gitea [repository] ROOT = /data/git/repositories [repository.local] LOCAL_COPY_PATH = /data/gitea/tmp/local-repo [repository.upload] TEMP_PATH = /data/gitea/uploads [server] APP_DATA_PATH = /data/gitea DOMAIN = gitea.leexxxx.com SSH_DOMAIN = gitea.leexxx.com HTTP_PORT = 3000 ROOT_URL = https://gitea.leexxx.com DISABLE_SSH = false SSH_PORT = 2222 SSH_LISTEN_PORT = 22 assistant: [[reply_to_current]] 这就不是你眼花了，**确实有东西在启动时把它改回 2222**。 而且从你贴的现象看： - 宿主机 `app.ini` 里你手工改成了 `61222` - `docker restart gitea` 之后 - 同一个文件又变回了 `2222` 这基本说明： ## 不是你没保存 而是 **Gitea 容器启动时自动重写了 `app.ini`** --- # 最可能的原因 Gitea 官方容器会根据**环境变量**在启动时生成/覆盖一部分配置。 也就是说，你现在很可能有类似这样的东西在生效： - `GITEA__server__SSH_PORT=2222` 或者 compose / docker run 里有对应配置，把你手改的值覆盖回去了。 --- # 该查哪里 你现在不要继续手改 `app.ini` 了，应该直接查 **容器启动参数 / compose 配置 / 环境变量**。 ## 先查容器环境变量 在 VPS 上执行： ```bash docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__server ``` 或者更宽一点： ```bash docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__ ``` 重点看有没有这种： ```bash GITEA__server__SSH_PORT=2222 GITEA__server__SSH_LISTEN_PORT=22 GITEA__server__SSH_DOMAIN=gitea.leexxx.com ``` --- ## 再查 compose / 启动文件 你现在目录看起来像： - `~/docker-services/gitea/` 所以再查： ```bash cd ~/docker-services/gitea ls ``` 看看有没有： - `docker-compose.yml` - `compose.yml` - `.env` 然后搜： ```bash grep -R "SSH_PORT" . grep -R "2222" . grep -R "GITEA__server__SSH_PORT" . ``` --- # 你现在的根因判断 大概率就是： ## **compose/env 里写死了 2222** 容器每次启动时都把它重新灌回 `app.ini`。 所以正确修法不是改： - `/data/gitea/conf/app.ini` 而是改： - `docker-compose.yml` - 或 `.env` - 或 `docker run` 参数里的 `-e GITEA__server__SSH_PORT=2222` --- # 你改完的目标应该是 如果你外网真实访问是： - `gitea.leexxx.com:61222` 那最终环境变量应该对应成： ```bash GITEA__server__SSH_PORT=61222 GITEA__server__SSH_LISTEN_PORT=22 GITEA__server__SSH_DOMAIN=gitea.leexxx.com ``` --- # 你现在直接执行这几条就行 先查： ```bash docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__ ``` 再查项目文件： ```bash cd ~/docker-services/gitea grep -R "2222" . grep -R "SSH_PORT" . ``` 把结果贴我，我就能直接告诉你该改哪一行。 user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY. Current time: Wednesday, March 25th, 2026 — 5:43 PM (Asia/Hong_Kong) / 2026-03-25 09:43 UTC assistant: NO_REPLY user: Conversation info (untrusted metadata): ```json { "message_id": "635", "sender_id": "975333652", "sender": "星", "timestamp": "Wed 2026-03-25 17:43 GMT+8" } ``` Sender (untrusted metadata): ```json { "label": "星 (975333652)", "id": "975333652", "name": "星", "username": "zhuimanxing" } ``` 提取关键内容、保存到0324记忆文件中 assistant: Need append to 2026-03-24.md not 25? user asks extract key content save to 0324 memory file. Do it. assistant: [[reply_to_current]] 已提炼并追加到： - `memory/2026-03-24.md` 我塞进去的是这几块关键结论： - 本地 git / 分支 / 提交状态 - `openclaw-sync` 分支 - OpenClaw 专用 SSH key 信息 - `dotfiles/openclaw.json` 副本纳入情况 - Gitea SSH 排查结论 - **真正阻塞点：`app.ini` 被容器启动过程自动改回 `SSH_PORT = 2222`** 如果你愿意，我下一步可以继续帮你把 **Gitea compose / env 覆盖源头** 定位出来。