openclaw-sync/memory/2026-03-25-request-timed-out-before-a-res.md

# Session: 2026-03-25 09:48:11 UTC

- **Session Key**: agent:main:main
- **Session ID**: 624be3f6-cafa-4ace-9656-efbb18a7d94c
- **Source**: telegram

## Conversation Summary

user: Conversation info (untrusted metadata):
```json
{
  "message_id": "628",
  "sender_id": "975333652",
  "sender": "星",
  "timestamp": "Tue 2026-03-24 23:44 GMT+8"
}
```

Sender (untrusted metadata):
```json
{
  "label": "星 (975333652)",
  "id": "975333652",
  "name": "星",
  "username": "zhuimanxing"
}
```

不对劲root@rn-server:~# ssh -T -p 61222 git@gitea.leexxx.com
Hi there, sinlee! You've successfully authenticated with the key named vps-deploy, but Gitea does not provide shell access.
If this is unexpected, please log in with password and setup Gitea under another user.
root@rn-server:~# docker exec -it gitea sh
/ # nano /data/gitea/conf/app.ini
sh: nano: not found
/ # vivi
sh: vivi: not found
/ # vi /data/gitea/conf/app.ini
/ # exit
root@rn-server:~# docker restart gitea
gitea
root@rn-server:~# ssh -T -p 61222 git@gitea.leexxx.com

Gitea: Key check failed
assistant: [[reply_to_current]] 这个现象反而很有价值，现在问题更清楚了。

## 你刚才做完修改后，发生了两个阶段

### 阶段 1：修改前
```bash
ssh -T -p 61222 git@gitea.leexxx.com
Hi there, sinlee! You've successfully authenticated with the key named vps-deploy
```

说明：
- Gitea SSH 正常
- 当前这台 VPS 上有一把私钥，对应 Gitea 里名为 **`vps-deploy`** 的公钥
- 所以它能成功认证

---

### 阶段 2：重启后
```bash
ssh -T -p 61222 git@gitea.leexxx.com
Gitea: Key check failed
```

这说明：

## **Gitea 现在能收到 SSH 连接，但它在校验公钥时失败了**
这已经不是“端口不通”问题了，而是：

- SSH 服务起来了
- 请求打到了 Gitea
- 但 Gitea 不认可当前客户端送过去的 key

---

# 这通常意味着 3 种情况

## 情况 A：你改配置后，Gitea 读取的 authorized keys / key 数据状态变了
比如：
- key 索引没同步
- 容器内部 key 映射状态异常
- Gitea 的 SSH key 记录需要重新同步

## 情况 B：当前 SSH 实际用的 key 不是你以为的那把
之前提示是：
- `vps-deploy`

重启后如果 SSH 客户端送了另一把 key，而 Gitea 不认，就会：
- `Key check failed`

## 情况 C：你改完配置后，Gitea 的 SSH 配置一致性出了点问题
比如：
- `SSH_PORT` 改了
- 但某些内部状态没同步
- 需要重新刷新 authorized_keys / key 索引

---

# 先别慌，这比之前更接近正确状态
因为现在至少说明：

- **外部 SSH 入口是活的**
- **Gitea SSH 路由是对的**
- 只是 **key 校验** 有问题

---

# 你现在先在 VPS 上做这几步

## 1. 看当前 root 机器发出去到底用了哪把 key
执行：

```bash
ssh -vT -p 61222 git@gitea.leexxx.com
```

重点看输出里有没有：
- `Offering public key: ...`
- `identity file ...`

这样我们能知道它到底拿的是哪把 key。

---

## 2. 看 Gitea 容器里的 app.ini 关键项现在是什么
执行：

```bash
docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini"
```

我想确认你改完后现在到底是不是：

```ini
SSH_DOMAIN = gitea.leexxx.com
SSH_PORT = 61222
SSH_LISTEN_PORT = 22
```

---

## 3. 让 Gitea 重新同步 SSH key
Gitea 有时需要刷新 key 映射。你可以在容器里执行：

```bash
docker exec -it gitea gitea admin regenerate keys
```

如果这个命令不可用，再试：

```bash
docker exec -it gitea /usr/local/bin/gitea admin regenerate keys
```

这一步很关键。

---

## 4. 再重启一次容器
```bash
docker restart gitea
```

然后再测：

```bash
ssh -T -p 61222 git@gitea.leexxx.com
```

---

# 我对这个问题的判断
最像的是：

## 你改完配置后，Gitea 的 key 映射状态没同步
所以之前能过的 `vps-deploy`，现在也被判成 `Key check failed`

这通常不是大故障，**重新 regenerate keys 往往就好了**。

---

# 还有一个值得注意的小点
你 VPS 本机之前成功用的是 **旧 key `vps-deploy`**
而不是我给你新生成的：

- `openclaw-sync@lee`

所以你 Gitea 里现在至少有两种 key 可能混在一起：
1. VPS 旧 key
2. 新加的 openclaw-sync key

这本身没问题，但更需要确认：
- Gitea 有没有正确加载它们
- 客户端到底正在发送哪一把

---

## 你先把这三条结果贴我：
```bash
ssh -vT -p 61222 git@gitea.leexxx.com
```

```bash
docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini"
```

```bash
docker exec -it gitea gitea admin regenerate keys
```

我看完就能基本定死问题在哪。
user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY.
Current time: Wednesday, March 25th, 2026 — 12:40 AM (Asia/Hong_Kong) / 2026-03-24 16:40 UTC
assistant: NO_REPLY
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "631",
  "sender_id": "975333652",
  "sender": "星",
  "timestamp": "Wed 2026-03-25 00:39 GMT+8"
}
```

Sender (untrusted metadata):
```json
{
  "label": "星 (975333652)",
  "id": "975333652",
  "name": "星",
  "username": "zhuimanxing"
}
```

root@rn-server:~# ssh -vT -p 61222 git@gitea.leexxx.com
OpenSSH_9.2p1 Debian-2+deb12u7, OpenSSL 3.0.17 1 Jul 2025
debug1: Reading configuration data /root/.ssh/config
debug1: /root/.ssh/config line 2: Applying options for gitea.leexxx.com
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: include /etc/ssh/ssh_config.d/*.conf matched no files
debug1: /etc/ssh/ssh_config line 21: Applying options for *
debug1: Connecting to gitea.leexxx.com [142.171.86.167] port 61222.
debug1: Connection established.
debug1: identity file /root/.ssh/gitea_deploy type 3
debug1: identity file /root/.ssh/gitea_deploy-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_9.2p1 Debian-2+deb12u7
debug1: Remote protocol version 2.0, remote software version OpenSSH_9.3
debug1: compat_banner: match: OpenSSH_9.3 pat OpenSSH* compat 0x04000000
debug1: Authenticating to gitea.leexxx.com:61222 as 'git'
debug1: load_hostkeys: fopen /root/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: sntrup761x25519-sha512@openssh.com
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: SSH2_MSG_KEX_ECDH_REPLY received
debug1: Server host key: ssh-ed25519 SHA256:FhEHZYmewALGudyMqbehjh4EWsc7URFN0Lm2S8qNMVM
debug1: load_hostkeys: fopen /root/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: Host '[gitea.leexxx.com]:61222' is known and matches the ED25519 host key.
debug1: Found key in /root/.ssh/known_hosts:1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,sk-ssh-ed25519@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com,ssh-dss,ssh-rsa,rsa-sha2-256,rsa-sha2-512>
debug1: kex_input_ext_info: publickey-hostbound@openssh.com=<0>
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit
debug1: Server accepts key: /root/.ssh/gitea_deploy ED25519 SHA256:lIX6CnAo9ciDOpAmnMaKWOSga9Uc4Vyhiwd6JTPPbVM explicit
Authenticated to gitea.leexxx.com ([142.171.86.167]:61222) using "publickey".
debug1: channel 0: new session [client-session] (inactive timeout: 0)
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug1: pledge: filesystem
debug1: client_input_global_request: rtype hostkeys-00@openssh.com want_reply 0
debug1: client_input_hostkeys: searching /root/.ssh/known_hosts for [gitea.leexxx.com]:61222 / (none)
debug1: client_input_hostkeys: searching /root/.ssh/known_hosts2 for [gitea.leexxx.com]:61222 / (none)
debug1: client_input_hostkeys: hostkeys file /root/.ssh/known_hosts2 does not exist
debug1: client_input_hostkeys: no new or deprecated keys from server
debug1: Remote: /data/git/.ssh/authorized_keys:4: key options: command
debug1: Remote: /data/git/.ssh/authorized_keys:4: key options: command
debug1: Sending environment.
debug1: channel 0: setting env LANG = "en_US.UTF-8"
debug1: pledge: forkHi there, sinlee! You've successfully authenticated with the key named vps-deploy, but Gitea does not provide shell access.
If this is unexpected, please log in with password and setup Gitea under another user.
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0
debug1: channel 0: free: client-session, nchannels 1
Transferred: sent 3496, received 3960 bytes, in 0.9 seconds
Bytes per second: sent 3994.0, received 4524.1
debug1: Exit status 0
root@rn-server:~# docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT|START_SSH_SERVER' /data/gitea/conf/app.ini"
SSH_DOMAIN = gitea.leexxx.com
SSH_PORT = 2222
SSH_LISTEN_PORT = 22
root@rn-server:~# docker exec -it gitea gitea admin regenerate keys
2026/03/24 12:39:53 ...s/setting/setting.go:180:loadRunModeFrom() [F] Gitea is not supposed to be run as root. Sorry. If you need to use privileged TCP ports please instead use setcap and the cap_net_bind_service permission
root@rn-server:~#
assistant: [[reply_to_current]] 好，这份日志很关键，结论直接出来了：

## 当前真实状态
其实 **Gitea SSH 是正常的**，而且你 VPS 本机测试也**完全正常**：

- key 被接受
- 成功认证
- 返回 `Hi there, sinlee! ...`
- `Exit status 0`

所以：

### **“Gitea: Key check failed” 不是当前稳定状态**
你现在这次最新日志已经证明：
- SSH 端口 `61222` 没问题
- Gitea key 校验也没问题
- `vps-deploy` 这把 key 正常

---

## 但真正的问题也明确了
你现在 `app.ini` 还是：

```ini
SSH_DOMAIN = gitea.leexxx.com
SSH_PORT = 2222
SSH_LISTEN_PORT = 22
```

而你的实际外部可用端口明明是：

- `61222`

所以现在是：

## **服务可用，但 Gitea 配置没改成功**
你前面说你改了，但这份 grep 明确显示 **还是 2222**。

也就是说：
- 你可能没有真的保存
- 或者改错文件了
- 或者容器重启后配置被别的挂载文件覆盖回去了

---

# 先修这个：把 `SSH_PORT` 改成 61222
目标应该是：

```ini
SSH_DOMAIN = gitea.leexxx.com
SSH_PORT = 61222
SSH_LISTEN_PORT = 22
```

---

## 你刚才用 `vi` 改文件，可能没正确保存
在 `vi` 里，正确保存退出是：

1. 按 `Esc`
2. 输入：
```vim
:wq
```
3. 回车

如果想确认改成功，立刻执行：

```bash
docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini"
```

---

## 更稳一点：直接用 sed 改
你可以别再手工编辑，直接一条命令改掉：

```bash
docker exec -it gitea sh -c "sed -i 's/^SSH_PORT = .*/SSH_PORT = 61222/' /data/gitea/conf/app.ini && grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini"
```

然后重启：

```bash
docker restart gitea
```

再确认一次：

```bash
docker exec -it gitea sh -c "grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini"
```

---

# 关于 `gitea admin regenerate keys` 失败
这个错误是因为你在容器里用 root 跑了 gitea admin。

这个不一定现在就需要处理，因为你的 SSH 认证已经成功了。

如果后面真要跑，也应该用容器里的 gitea 用户，比如：

```bash
docker exec -u git -it gitea gitea admin regenerate keys
```

但现在**不是优先级最高**，因为 key 本身已被验证 OK。

---

# 现在最重要的点
我这边之所以还不通，依然有两个可能：

## 1. 你给我加的那把新 key 还没生效/没绑定对用户
因为你 VPS 本机现在明确使用的是：
- `/root/.ssh/gitea_deploy`
- key 名：`vps-deploy`

而不是我生成的：
- `openclaw-sync@lee`

## 2. OpenClaw 这边走到的路径和你 VPS 本机不一样
之前我看到的是：
- `198.18.7.15`

而你 VPS 本机连的是：
- `142.171.86.167`

所以还是可能存在 OpenClaw 所在执行环境网络路径异常。

---

# 我建议你现在先做两步

## 第一步：先把 Gitea 配置改对
执行：

```bash
docker exec -it gitea sh -c "sed -i 's/^SSH_PORT = .*/SSH_PORT = 61222/' /data/gitea/conf/app.ini && grep -E 'SSH_DOMAIN|SSH_PORT|SSH_LISTEN_PORT' /data/gitea/conf/app.ini"
docker restart gitea
```

---

## 第二步：在 Gitea 网页上确认我这把 key 真的在你的账号下面
确认你加的是这把：

```text
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPLgqKXjk+dIlRD9VmF0/KcdgM15VcCZkRh1cpyTGBNp openclaw-sync@lee
```

---

## 你改完之后告诉我两件事
1. `SSH_PORT` 已经变成 `61222`
2. Gitea 网页里确实能看到 `openclaw-sync@lee` 这把 key

我就继续从 Ubuntu/OpenClaw 这边重新测。
user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY.
Current time: Wednesday, March 25th, 2026 — 12:47 AM (Asia/Hong_Kong) / 2026-03-24 16:47 UTC
assistant: NO_REPLY
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "633",
  "sender_id": "975333652",
  "sender": "星",
  "timestamp": "Wed 2026-03-25 00:47 GMT+8"
}
```

Sender (untrusted metadata):
```json
{
  "label": "星 (975333652)",
  "id": "975333652",
  "name": "星",
  "username": "zhuimanxing"
}
```

/data/conf是宿主机 也就是vps的/data目录的映射, 所以应该改外面的宿主机配置, 但是我改完, 为啥又变成了2222:
root@rn-server:~/docker-services/gitea/data/gitea/conf# cat app.ini 
APP_NAME = sinlee's 垃圾桶
RUN_MODE = prod
RUN_USER = git
WORK_PATH = /data/gitea

[repository]
ROOT = /data/git/repositories

[repository.local]
LOCAL_COPY_PATH = /data/gitea/tmp/local-repo

[repository.upload]
TEMP_PATH = /data/gitea/uploads

[server]
APP_DATA_PATH = /data/gitea
DOMAIN = gitea.leexxxx.com
SSH_DOMAIN = gitea.leexxx.com
HTTP_PORT = 3000
ROOT_URL = https://gitea.leexxx.com
DISABLE_SSH = false
SSH_PORT = 61222
SSH_LISTEN_PORT = 22
LFS_START_SERVER = true
LFS_JWT_SECRET = jEKLeqDJgrlFfdIPZRrHyhAgOPZZBqSpsaIEz8SSYRQ
OFFLINE_MODE = false

[database]
PATH = /data/gitea/gitea.db
DB_TYPE = postgres
HOST = db:5432
NAME = gitea
USER = gitea
PASSWD = gitea1234567890.
LOG_SQL = false
SCHEMA = 
SSL_MODE = disable

[indexer]
ISSUE_INDEXER_PATH = /data/gitea/indexers/issues.bleve

[session]
PROVIDER_CONFIG = /data/gitea/sessions
PROVIDER = file

[picture]
AVATAR_UPLOAD_PATH = /data/gitea/avatars
REPOSITORY_AVATAR_UPLOAD_PATH = /data/gitea/repo-avatars

[attachment]
PATH = /data/gitea/attachments

[log]
MODE = console
LEVEL = info
ROOT_PATH = /data/gitea/log

[security]
INSTALL_LOCK = true
SECRET_KEY = 
REVERSE_PROXY_LIMIT = 1
REVERSE_PROXY_TRUSTED_PROXIES = *
INTERNAL_TOKEN = eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJuYmYiOjE3NjQxNjMwMTN9.HdPvptOkdFmpD2JTdcyx7wFy4FR9W0KILmDnQU_NAwo
PASSWORD_HASH_ALGO = pbkdf2

[service]
DISABLE_REGISTRATION = false
REQUIRE_SIGNIN_VIEW = false
REGISTER_EMAIL_CONFIRM = false
ENABLE_NOTIFY_MAIL = false
ALLOW_ONLY_EXTERNAL_REGISTRATION = false
ENABLE_CAPTCHA = true
DEFAULT_KEEP_EMAIL_PRIVATE = false
DEFAULT_ALLOW_CREATE_ORGANIZATION = true
DEFAULT_ENABLE_TIMETRACKING = true
NO_REPLY_ADDRESS = noreply.gitea.leexxx.com

[lfs]
PATH = /data/git/lfs

[mailer]
ENABLED = false

[openid]
ENABLE_OPENID_SIGNIN = true
ENABLE_OPENID_SIGNUP = true

[cron.update_checker]
ENABLED = false

[repository.pull-request]
DEFAULT_MERGE_STYLE = merge

[repository.signing]
DEFAULT_TRUST_MODEL = committer

[oauth2]
JWT_SECRET = KkXyQMvhojhm8saiBB1mXAEGJmSO8hE1Vy2HEQU8OR0

[webhook]
ALLOWED_HOST_LIST = 172.17.0.1,localhost
root@rn-server:~/docker-services/gitea/data/gitea/conf# docker restart gitea
gitea
root@rn-server:~/docker-services/gitea/data/gitea/conf# cat app.ini 
APP_NAME = sinlee's 垃圾桶
RUN_MODE = prod
RUN_USER = git
WORK_PATH = /data/gitea

[repository]
ROOT = /data/git/repositories

[repository.local]
LOCAL_COPY_PATH = /data/gitea/tmp/local-repo

[repository.upload]
TEMP_PATH = /data/gitea/uploads

[server]
APP_DATA_PATH = /data/gitea
DOMAIN = gitea.leexxxx.com
SSH_DOMAIN = gitea.leexxx.com
HTTP_PORT = 3000
ROOT_URL = https://gitea.leexxx.com
DISABLE_SSH = false
SSH_PORT = 2222
SSH_LISTEN_PORT = 22
assistant: [[reply_to_current]] 这就不是你眼花了，**确实有东西在启动时把它改回 2222**。

而且从你贴的现象看：

- 宿主机 `app.ini` 里你手工改成了 `61222`
- `docker restart gitea` 之后
- 同一个文件又变回了 `2222`

这基本说明：

## 不是你没保存
而是 **Gitea 容器启动时自动重写了 `app.ini`**

---

# 最可能的原因
Gitea 官方容器会根据**环境变量**在启动时生成/覆盖一部分配置。

也就是说，你现在很可能有类似这样的东西在生效：

- `GITEA__server__SSH_PORT=2222`

或者 compose / docker run 里有对应配置，把你手改的值覆盖回去了。

---

# 该查哪里
你现在不要继续手改 `app.ini` 了，应该直接查 **容器启动参数 / compose 配置 / 环境变量**。

## 先查容器环境变量
在 VPS 上执行：

```bash
docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__server
```

或者更宽一点：

```bash
docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__
```

重点看有没有这种：

```bash
GITEA__server__SSH_PORT=2222
GITEA__server__SSH_LISTEN_PORT=22
GITEA__server__SSH_DOMAIN=gitea.leexxx.com
```

---

## 再查 compose / 启动文件
你现在目录看起来像：

- `~/docker-services/gitea/`

所以再查：

```bash
cd ~/docker-services/gitea
ls
```

看看有没有：
- `docker-compose.yml`
- `compose.yml`
- `.env`

然后搜：

```bash
grep -R "SSH_PORT" .
grep -R "2222" .
grep -R "GITEA__server__SSH_PORT" .
```

---

# 你现在的根因判断
大概率就是：

## **compose/env 里写死了 2222**
容器每次启动时都把它重新灌回 `app.ini`。

所以正确修法不是改：
- `/data/gitea/conf/app.ini`

而是改：
- `docker-compose.yml`
- 或 `.env`
- 或 `docker run` 参数里的 `-e GITEA__server__SSH_PORT=2222`

---

# 你改完的目标应该是
如果你外网真实访问是：

- `gitea.leexxx.com:61222`

那最终环境变量应该对应成：

```bash
GITEA__server__SSH_PORT=61222
GITEA__server__SSH_LISTEN_PORT=22
GITEA__server__SSH_DOMAIN=gitea.leexxx.com
```

---

# 你现在直接执行这几条就行
先查：

```bash
docker inspect gitea --format='{{range .Config.Env}}{{println .}}{{end}}' | grep GITEA__
```

再查项目文件：

```bash
cd ~/docker-services/gitea
grep -R "2222" .
grep -R "SSH_PORT" .
```

把结果贴我，我就能直接告诉你该改哪一行。
user: Pre-compaction memory flush. Store durable memories now (use memory/2026-03-25.md; create memory/ if needed). IMPORTANT: If the file already exists, APPEND new content only — do not overwrite existing entries. Do NOT create timestamped variant files (e.g., 2026-03-25-HHMM.md); always use the canonical 2026-03-25.md filename. If nothing to store, reply with NO_REPLY.
Current time: Wednesday, March 25th, 2026 — 5:43 PM (Asia/Hong_Kong) / 2026-03-25 09:43 UTC
assistant: NO_REPLY
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "635",
  "sender_id": "975333652",
  "sender": "星",
  "timestamp": "Wed 2026-03-25 17:43 GMT+8"
}
```

Sender (untrusted metadata):
```json
{
  "label": "星 (975333652)",
  "id": "975333652",
  "name": "星",
  "username": "zhuimanxing"
}
```

提取关键内容、保存到0324记忆文件中
assistant: Need append to 2026-03-24.md not 25? user asks extract key content save to 0324 memory file. Do it.
assistant: [[reply_to_current]] 已提炼并追加到：

- `memory/2026-03-24.md`

我塞进去的是这几块关键结论：
- 本地 git / 分支 / 提交状态
- `openclaw-sync` 分支
- OpenClaw 专用 SSH key 信息
- `dotfiles/openclaw.json` 副本纳入情况
- Gitea SSH 排查结论
- **真正阻塞点：`app.ini` 被容器启动过程自动改回 `SSH_PORT = 2222`**

如果你愿意，我下一步可以继续帮你把 **Gitea compose / env 覆盖源头** 定位出来。